Vibrating Feeder

At the beginning of each crushing plant a feeder should be installed after the placing the silo because it measure the input load the device and prevents wastage and causing problems or defects in device.Feeder is used to provide raw material for all the sections and to separate the stones from the complexes. It has a feeder silo and a net section located on top. Each type of feeder is used for various capacities and silo volume.

Types of feeder produced in AMS Industrial Group are Vibrating, Grizzly, Equipped with Connecting rod, Equipped with rubber plastic, roller shaped, and usual mountain model which are manufactured in capacities 80-350 TPH. Vibrating feeder or vibrator is like screen to transfer the loads to the crusher opening,it contain a feeding silo and a grid and according to the capacity of the production line the size of the silo is selected.

This type of feeder is operated for feeding material Mountain for systematic designed with adjustable outlet valve to control the final product dimensions and also has a system of belts in the output in order to increase capacity and prevent fine material seeds of the jaw, which can have two cross-sectional area on two floors, which allows better isolation products provide in both uniaxial and biaxial in different sizes are produced to move it linearly to the top face done.

For mountain mines with very large rocks, these feeders are made with much larger dimensions and placed before the grizzly screen to prevent the weight of the load on the screen and other devices.